Refilling instructions for Xerox 6280 - models - putting in the powder is fairly easy, however, it is a practical task requiring some basic Tools - We supply detailed pictorial instructions with refill toner. Also detailed pictorial instructions can be sent by email. (1) you require to make a hole into the cartridge using the "Hole Making Tool" (2) Using a poly bag shake the remaining powder inside the cartridge into the bag - seal and discard (3) Mix the Developer and Toner for the specific Toner to be refilled together in Toner Bottle (3) Fit the Filler Spout onto the bottle - cap it - shake the bottle - uncap then you simply pour in powder (4) Be careful not to Overfill - Recap the bottle - Then seal the hole made into the cartridge with tape (5) If chip has expired fit a new chip Always refill on a surface which can tolerate any spillage.
Generally, it may be a
good idea to put in less powder than to "overfill" - but ensure that you are
refilling an "empty" - not a half filled cartridge! Always shake the
toner bottle vigorously before pouring - this makes the powder flow like
liquid.
Resetting the cartridge to
"Full"
Xerox Phaser 6280
-
Have a Chip
on the cartridges -
Simply remove the expired chip and fit the new one in it's place There
is one chip per cartridge. Some say that if the cartridges are kept
topped up with toner the chip will last longer - we cannot verify this. |
![]() |
The
XEROX PHASER 6280 / 6280N - 5-20PPM Series is a
compact colour laser printer that easily fits on every office desk directly
next to you, without obstructing your activities in any way. It can easily
be shared with anyone who wants to benefit from the same impressive speed
and print quality. One that's exceptionally easy to use and maintain and
integrates direct photo print for fast and easy printouts of pictures. but
also enables you to print any given document at great speed and quality
level. Make personal colour laser printing as simple as possible. This is what Minolta QMS Konica had in mind when designing the XEROX PHASER 6280 / 6280N Series. The result is a colour laser printer that is ready to print as soon as you connect it. In fact, a complete set of 5 consumables is pre-installed for you. |
||||||||||||||||||||||||||||||||||||
With 5
ppm in colour and 20 ppm in black and white, the XEROX 6280 / 6280N sets the
pace for compact personal laser printing. Thanks to the revolutionary fuser
technology and host based processing your prints will come out instantly.
With radically improved first page out and a warm-up time 2 to 3 times
faster than comparable printers, first page out in only 12 seconds. The PHASER 6280 / 6280N uses pioneer multi-pass technology, providing sharper text and vivid colours. And thanks to the Professional Colour calibration, you can also count on consistent print calibration from page 1 to 100. So, your prints will always looks alike, whichever way you look at them You have direct front access to paper, consumables and for maintenance. So you don't even have to move the printer to maintain it! It's as simple as that. The XEROX 6280 / 6280N has a high quality polymerized toner, offering you a stunning 2400 dpi resolution.
With Chip technology on the cartridges this is more than just a small nuisance for refillers and recyclers. You don't have to be too cynical to question whether manufacturers do this deliberately to make it more difficult to recycle their cartridges and force end users to purchase new cartridges The Evolution of Chip Technology
|