Epson T378 for XP-15000 / XP-8500 / XP-8505 / XP-8600 / XP-8605 / XP-8700

Chip Resetter for Epson T378 Squirrel Ink Cartridges

How to use the resetter: The pins on the resetter should make good contact the terminals on the chip of the tank, be sure to press against the pins firmly. Once connected the LED light in the resetter will light up (starts out RED, and after 2-3 seconds will blink and then turn GREEN). GREEN means a successful reset. If the LED stays red, it means that the chip on the cartridge has not reset. If you allow the cartridge to go low and indicate "X" it won't reset.

PLEASE NOTE The body colour may vary. The images are just examples of the types of bodies used to fit the electronics inside.
This Resetter is also compatible with a number of other Epson cartridges e.g. T603, T405, T502, T34, T35, T202

Epson Original make cartridges contain less ink than our compatibles. For an XL Black - 11.2mL - The XL Colours contain only 9.3mL Cols. 10.3mL in XL Light Cyan and Light Magenta
If you have Standard Yield cartridges it is 5.5mL in the Black - and only 4.1mL in each of the Colour cartridges. 4.8mL in XL Light Cyan and Light Magenta

The XP15000 is different as it uses No 478XL Red and Grey instead of Light Cyan and Light Magenta the Red has 10.2mL and the Grey has 11.2mL

By refilling compatible bodies you can fill at least 15mL per cartridge