|
Refilling instructions for
Xerox 6110 models -
putting in the powder is
fairly easy, however, it is a practical task requiring some basic tools
- We supply detailed pictorial instructions with refill toner.
(1)
you require to make a hole
into the cartridge using the "Hole Making Tool"
(2) Using a poly bag shake
the remaining powder inside the cartridge into the bag - seal and
discard
(3)
Fit the filler spout onto the bottle - cap it - shake the bottle - uncap
then you simply pour in powder
(4) Be careful not to
Overfill - Recap the bottle - Then seal the hole made into the cartridge
with tape
(5) If chip has expired
fit a new chip
Always
refill on a surface which can tolerate any spillage.
Generally, it may be a
good idea to put in less powder than to "overfill" - but ensure that you are
refilling an "empty" - not a half filled cartridge! Always shake the
toner bottle vigorously before pouring - this makes the powder flow like
liquid.
Resetting the cartridge to
"Full"
Xerox 6110
- There is a "Killer Chip"
on the cartridge -
Simply remove the expired chip and fit the new one in it's place There
is one chip per cartridge |
