SAMSUNG TONER REFILLS

 ML1210 / ML1220M | ML1221 | ML1250 |  ML-1010 | ML-1020M | ML1430 Unplug and Pour

 ML1510 | ML1710 | ML1750 | ML-2010 | ML-1740 | ML1750 Unscrew unplug and Pour - Note Starter cartridges are trickier and would require a hole making tool to access the toner hopper

 ML1440 / 1450 / 1451 - Melt Hole - Pour and plug hole (Needs hole making tool)

 ML1520 - Machine supplied with a starter cartridge - Top has to be unscrewed to refill - Normal cartridge has a "Filler Plug" which can be unplugged

 ML1610 - Unscrew plate to reveal hidden filler plug - remove plug to do the pour

 ML1630 (same cartridge as SCX4500 (below)

 ML1640 - same cartridge body as ML1610 - so refill method is same but ML1640 has a chip added - Starters do not have the chip - so that may need to be added to get it to work

 ML1650

 ML-1660 / ML-1665 / ML-1670 / ML-1860 / ML-1865 / ML-1865W - Cut off welded rivets which hold on the end plate which has chip. The filler plug is under this and it has to be removed to refill and fit a new chip. Refill and re-assembly is reverse of this and similar to other Samsungs - more detailed images by email.

 ML1910 / ML1915 / ML1916 - similar cartridge body as ML1610 - so refill method is same / similar but there is also a chip added - Starters typically do not have the chip - so that may need to be added to get it to work

 ML2150 (Chipped) - Melt Hole - Pour and plug hole (Needs hole making tool) Machine may work without chip but with reduced functions

 ML2550 / ML2551 / ML2552 (Chipped) - There are two ways to refill this one. The cheapest way is to remove the toner hopper by unscrewing two screws and lifting off the whole hopper. It is then easy to see where to refill with the powder. Re- assembly is the reverse of this Take Care to angle the hopper so the powder does not go everywhere. This method is much more risky for making a mess. The other method is the traditional "Melt and Pour" - Melt Hole on top of the hopper - Pour in toner and seal hole (Needs hole making tool) Machine may work without chip but with reduced functions

 ML3050 / ML3051 (Chipped) - Although it may be possible to remove the toner hopper by unscrewing screws and lifting off the whole hopper, refilling with the powder. Re- assembly is the reverse of this. Care must be taken to angle the hopper so the powder does not go everywhere. This method is much more risky for making a mess. The other method is the traditional "Melt and Pour" - Melt Hole on top of the hopper - Pour in toner and seal hole (Needs hole making tool) The chip is not always necessary

 ML3470 / ML3051 (Chipped)

 ML4550 / ML4551 (Chipped) ) - Melt Hole - Pour and plug hole (Needs hole making tool) Machine may work without chip but with reduced functions

 ML6030 / ML6060

 SCX3205 / SCX3205W - Cut off welded rivets which hold on the end plate which has chip. The filler plug is under this and it has to be removed to refill and fit a new chip. Refill and re-assembly is reverse of this and similar to other Samsungs - more detailed images by email.

SCX4016 / SCX4216 / SCX4521F Unplug and Pour - (Counter Reset Fuse requires replacing)

 SCX4200 - Unscrew Side - Remove plug and pour - Chip replacement requires

 SCX4321 / SCX4521 - Unscrew Side - Remove plug and pour

 SCX4500 - Unscrew Side - Remove plug and pour - Chip replacement requires

 SCX5330 / SCX5530 - No Method Yet - (Requires a reset chip to be replaced)

 SF5100 -  Unplug and Pour - plus reset the cartridge