Refilling instructions for
Dell 3110 / 3115 -
putting in the powder is
fairly easy, however, it is a practical task requiring some basic tools
- We supply detailed pictorial instructions with refill toner. Also
detailed pictorial instructions can be sent by email.
you require to make a hole
into the cartridge using the "Hole Making Tool"
(2) Using a poly bag shake
the remaining powder inside the cartridge into the bag - seal and
(3) Mix the Developer and
Toner for the specific Toner to be refilled together in Toner Bottle
Fit the filler spout onto the bottle - cap it - shake the bottle - uncap
then you simply pour in powder
(4) Be careful not to
Overfill - Recap the bottle - Then seal the hole made into the cartridge
(5) If chip has expired
fit a new chip
refill on a surface which can tolerate any spillage.
Generally, it may be a
good idea to put in less powder than to "overfill" - but ensure that you are
refilling an "empty" - not a half filled cartridge! Always shake the
toner bottle vigorously before pouring - this makes the powder flow like
Resetting the cartridge to
Dell 3110 / 3115
Have a Chip
on the cartridges -
Simply remove the expired chip and fit the new one in it's place There
is one chip per cartridge. Some say that if the cartridges are kept
topped up with toner the chip will last longer - we cannot verify this.