|
Refilling instructions for
Dell 1320c / 1320cn -
models -
putting in the powder is
fairly easy, however, it is a practical task requiring some basic tools
- We supply detailed pictorial instructions with refill toner. Also
detailed pictorial instructions can be sent by email.
(1) Remove two screws
located on the waste chamber
(2) Release the waste
chamber by pressing in on the two tabs of one side
(3) Clean out the waste
chamber also remove the supply hopper cover and clean out all remaining
toner - use a poly bag shake it into the bag - seal and discard
(3)
Fit the filler spout onto the bottle - cap it - shake the bottle - uncap
then you simply pour in powder
(4) Reverse fit (as per
above) to re-assemble - make sure all four tabs are locked in place
(5) Re-use the black tape
across the seam
(6) If chip has expired
fit a new chip as per instructions
Always
refill on a surface which can tolerate any spillage.
Generally, it may be a
good idea to put in less powder than to "overfill" - but ensure that you are
refilling an "empty" - not a half filled cartridge! Always shake the
toner bottle vigorously before pouring - this makes the powder flow like
liquid.
Resetting the cartridge to
"Full"
Dell 1320c / 1320cn
-
Have a Chip
on the cartridges -
Simply remove the expired chip and fit the new one in it's place There
is one chip per cartridge. Some say that if the cartridges are kept
topped up with toner the chip will last longer - we cannot verify this. |